Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Contact us

Ceramic Heaters - Blower Heaters - Drum Heaters - Band Heaters - Air Finned Elements -Spare Parts

Blower Heaters

Centrifugal Blower Heaters - Axial Blower Heaters

Centrifugal Blower Heaters

The Centrifugal Blower Heaters we can supply, incorporate a fan speed control which provides continuosly variable air volumes between max, & Minimum Speeds. Noise levels of the fan are relatively low, enabling these fan heaters to be used for comfort heating and ventilation in a variety of commercial and industrial solutions as well as process heating applications.

These Units can be coupled to a duct system or, if desired mounted on a strong wall or ceiling using the optional wall bracket. A variety of Room Thermostats can be used to control the unit as well.

 

Rating in KW Approx. Air Delivery Temp Rise Amps per Phase
Max. 2400m³/hr Med. 1400m³/hr Min. 700m³/hr

3.6

3°C 6°C 12°C 5
6.0 6°C 10°C 20°C 8
7.2 7°C 12°C 25°C 10
10.8 11°C 18°C 35°C 15
12.0 12°C 21°C 41°C 17
14.4 15°C 25°C 50°C 20
18.0 18°C 30°C 60°C 25
Top

Axial Blower Heaters

The Axial Fan Heaters we can supply provide a very low initial cost per installed kilowatt, create maximum draught but have maximum resistance to physical impact making it ideal for school halls, sports areas and the like.

Whilst ideal for an on/off operation in "fix and forget" installations, their simplicity means that they can also be flexibly employed in many industrial heating situations.

An optional Trolley is also available for potable applications.

Rating in KW Approx. Air Temp. Rise At 2250m³/hr Amps per Phase
10kW 415V 13°C 15
15kW 415V 20°C 23
20kW 415V 27°C 29
Top

Drum Heaters

Belt - Band - Hotplate - Bung Hole - Wax Immersion - Over The Side

Belt Heaters (Drum)

Belt Heaters are Flexible and can be wrapped around a drum. Suitable For low temperatures to 40°C such as light dudty applications heating standard steel drums and containers. Ideal fo viscous products such as honey, oils, waxes, greases, resins and like chemicals. Belts come complete with silicone rubber lead, 10amp 3pin plug and an adjustable thermostat.
Capacity Volts Watts Description Other Infomation
4 gal/18 litre 240v 300W Silicone Rubber With Thermostat Suits 265 to 320mm Diameter Drums
12 gal/55 Litre 240v 500W Silicone Rubber With Thermostat Suits 320 to 360mm Diameter Drums
25 gal/114 Litre 240v 750W Silicone Rubber With Thermostat Suits 430 to 480mm Diameter Drums
44 gal/200 Litre 240v 1000W Silicone Rubber With Thermostat Suits 545 to 595mm Dia Drums
Top

Hotplate Heater (Drum)

  Made from either cast aluminium of hot dip galvanised mild steel. Units are designed for rugged use and come complete with Thermostat. Ideal for products that suit bottome heating or when products are pumped. The hotplate is in contact with the bottom of the drum for effecient heat transfer.
Description
Base hotplate, 240v, 2400w, 44gal/200 litre, cast aluminium, 60-260°C Thermostat, lead and 3 pin plug top.
Base hotplate, 240v, 2400w, 44gal/200 litre, cast aluminium, 60-260°C Thermostat, lead and 3 pin plug top.
Top

Bunghole Heaters

  Bunghole Heaters are designed to fit through the bunghole on 200 litre(44Gal) drums. The Vertical section of the element is not heated to allow for low drum volume heating. The Element itself is made from stainless steel. Ideal for Non-volitile water based mixtures.
Description
Immersion Heater, 240v, 3.6kW, Bung Type, 44Gal/200 litre, 30-110°C thermostat.
Top

Wax Immersion

  The Wax Immersion heater is supplied with a thermostat, lead and 3 point plug top. The heater is placed on top of the solid surface of the drum contents and then it progressivly melts its way down the drum. Used for solidified materials such as waxes and pharmaceutical products where heat penetration is difficult.
Description
Immersion Heater, 240v, 2.4kW, 44 Gal/200 Litre, Open top drum wax melting, 30-110°C thermostat
Top

Over The Side

The Portable Immersion element we stock is rated at 2400w / 240v and comes complete with 1.8m flex and 3 pin plug. Ideal for pail heating and over the side applications.
Top

Band Heaters

We can supply a wide variety of band heaters and band elements to suit a wide variety of applications. With such a wide variety of options available it is impossible to list all the parts available on this website. Should you require band heaters please Contact Us for more information.
Top

Need More Information? Need More Parts? Contact Us

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Home Page