Floor Heating

Inslab Heating

In-slab h4 Reating uses heating cables embedded in a concrete slab floor to provide home heating. The slab stores the heat at night and releases it to provide continuous warmth to the home during the day. It also takes advantage of off-peak heating rates – and can be used in combination with other systems or as stand-alone heating using some day-rate energy.
In-slab heating is generally used in new constructions but can also be used on top of an existing slab – providing there is a sufficient top cover of new cement of at least 25mm.
In-slab heating cables available:

 

In Slab Heating
In Slab Heating
Reference Link
Part No.
Watts
Length
Part No.
Watts
Length
VCD215
215W
6m
VCD2150
2150W
62m
VCD395
395W
11m
VCD2360
2360W
68m
VCD460
460W
13m
VCD2850
2850W
80m
VCD520
520W
15m
VCD3050
3050W
87m
VCD630
630W
17.5m
VCD3400
3400W
97m
VCD710
710W
20.5m
VCD3720
3720W
107m
VCD820
820W
23m
VCD3950
3950W
115m
VCD890
890W
26m
VCD4420
4420W
125m
VCD1100
1100W
32m
VCD5350
5350W
155m
VCD1370
1370W
39m
VCD6550
6550W
190m
VCD1550
1550W
45m
VCD1790
1790W
51m

Under Tile Heating

4 R

Under-tile heating is a floor heating system designed primarily for existing homes with either cement or timber floors where the heating is provided by in-screed cables.

This type of heating is often known as ‘direct acting’ due to its ability to heat up quickly.¬† Under-tile heating may also be called ‘in-screed heating’ because the cables are not installed within a full concrete slab, but rather covered with a cement-based screed.

Under-tile heating cables available:

Inscreed Heating
Part No.
Watts
Length
Reference Link
SIEDM125
125w
6.5m
SIEDM195
195w
10m
SIEDM215
215w
11m
SIEDM325
325w
16.5m
SIEDM420
420w
21.0m
SIEDM470
470w
23.5m
SIEDM600
600w
29.5m
SIEDM660
660w
33.5m
SIEDM820
820w
40.5m
SIEDM1030
1030w
51m
SIEDM1150
1150w
58m
SIEDM1440
1440w
73.0m
SIEDM1640
1640w
81.0m
SIEDM1940
1940w
98.0m
SIEDM2410
2410w
122.0m
SIEDM3000
3000w
150.0m
SIEDM3520
3520w
177.0m
SIEDM4050
4050w
205.0m
SIEDM4980
4980w
250.0m

Heating Mats

floormat_therm

The ELEKTRA Heating Mat features a twin-heating cable attached to a fibreglass mat with a single-sided power supply and is thermostat controlled.

ELEKTRA Heating Mats may be used under any type of floor suitable for heating; ie. under any floor which radiates heat easily, such as floor tiles, slate, low pile carpet or some wooden floor panels. They are fixed directly to a prepared floor in a screed of self-levelling compound or a cement-based screed.

At 0.5m wide and available in lengths from 2m to 16m they can be easily shaped to suit the floor layout. No special tools are required.

Heating mats available:

Part No. Watts Mat Size
TXMD.5/2 160w 0.5 x 2.0m
TXMD.5/3 240w 0.5 x 3.0m
TXMD.5/4 320w 0.5 x 4.0m
TXMD.5/5 400w 0.5 x 5.0m
TXMD.5/6 480w 0.5 x 6.0m
TXMD.5/7 560w 0.5 x 7.0m
TXMD.5/8 640w 0.5 x 8.0m
TXMD.5/9 720w 0.5 x 9.0m
TXMD.5/10 800w 0.5 x 10.0m
TXMD.5/12 960w 0.5 x 12.0m
TXMD.5/14 1120w 0.5 x 14.0m
TXMD.5/16 1280w 0.5 x 16.0m

 

Heating Mat Kits
Part No.
Watts
Mat Size
Reference Link
KITXMD.5/2
160w
0.5 x 2.0m
KITXMD.5/3
240w
0.5 x 3.0m
KITXMD.5/4
320w
0.5 x 4.0m
KITXMD.5/5
400w
0.5 x 5.0m
KITXMD.5/6
480w
0.5 x 6.0m
KITXMD.5/7
560w
0.5 x 7.0m
KITXMD.5/8
640w
0.5 x 8.0m
KITXMD.5/9
720w
0.5 x 9.0m