WhiteAnt Meter Frames are a great alternative to metal meter boxes. Hand crafted and Australian made!

Some of the great features of the WhiteAnt board are:

The WhiteAnt boards are made from Ty-Panel “Type X” switch panel, fire-retardent “FibroCement” back panel, Australian plantation pine frame and Netalite 7 insulation.

For use in cars, motorcycles, boats, trucks, buses, aviation, farm & earth moving equipment, industrial, solar and stationary batteries.

NB. Inox battery conditioner is not a cure all , it will have little or no effect on mechanically unsound batteries.

Inox Battery Conditioner is available in 4 sizes

The only lubricant in the world with the special mx3 anti-corrosion, anti-moisture formula for the twenty-first century (food grade approved).

Displaces – penetrates
Lubricates – protects

Inox contains no silicon, acid, kerosene or dieseline. It will not harm metal points or surfaces, plastics, paints, enamels, fibreglass, formica or neoprene seals. Inox doesn’t dry out, gum up, become sticky or wash off with water! Inox is non- conductive, non-static, non-toxic, non-corrosive and non-staining.

Inox-mx3 is available in 6 sizes:

Designed for heavy industrial, mining, farming, marine, earth moving and transport type use and where extreme climatic and high humidity conditions prevail. Lanolin is a natural wax found in animal wool especially the wool from sheep, it has wide spread uses, cosmetics, medical, soaps, etc. Although we supply Inox, a quality anti-corrosion lubricant, there are areas where a lanolin based anti-corrosion lubricant like Lanox is sometimes better suited for the application at hand.

Lanox is a heavy duty anti-moisture, anti-corrosion lubricant made with a high grade lubricating oil and lanolin base with specialized chemical compounds. It contains no silicon, kerosene. acids or dieseline and is harmless to metal points & surfaces, plastics, painted & enamel finishes, fibreglass, formica, rubber or neoprene seals. Lanox doesn’t become sticky, gooey or gum up and does not dry out or wash off with water. It is non-conductive, non-static & non-corrosive.

LANOX has neutral properties, low flammability in non aerosol applications and a flash point of 179°C (non aerosol) and a Drop Point (freezing) of -26°C. Lanox mx4 Heavy Duty Lubricant is available in 4 sizes

Extreme pressure lubrication. Superior penetration. Quality anti-corrosion protection. Inox mx5 Plus has been designed for applications where a superior extreme pressure, anti-corrosion, anti-moisture liquid lubricant, a high grade penetrating oil or an industrial quality machine cutting lubricant is required (Safe to use in saw, lathe & milling reservoirs).

It has been specially formulated by adding a high grade friction modifier – polytetrafluoroethylene (PTFE) – to the original Inox base formula. PTFE is premium grade extreme pressure anti-friction medium which gives increased lubrication ability between the contact surfaces. This reduced-friction environment also lowers operating temperatures. Inox mx5 Plus will not harm metal points or surfaces, fibreglass, Formica, painted or enamel finishes, plastics or neoprene seals. It will not become tacky, alter surface tolerances, dry out or wash off with water. It is non-toxic, non-conductive, non-corrosive and non-staining. Inox mx5 Plus is Food Grade Approved (Type A) Australia.

Extreme pressure - high temperature (no melt) food-grade approved machinery grease with polytetrafluoroethylene (PTFE). Inox mx6 is a fully synthetic, extreme-pPressure grease formulated to give premium performance and food-grade purity. This grease is composed entirely of ingredients which meet the requirements of section 178.3570 of the US FDA regulations, have been cleared for use within registered establishments by the US Department of Agriculture and will not deleteriously affect meat or meat products.

Inox-mx6 is a smooth light brown grease made with polyalphaolefins and a special bentone thickener. It contains additives to protect against corrosion and oxidation. Inox mx6 grease has a temperature range of -30°C to an extremely high temperature and has no melting point. PTFE - Polytetrafluoroethylene - is a premium grade anti-friction medium which gives increased lubrication to bearings, bushes, shafts, gears, chains, splines, couplings, winches, cables, universals, CV & ball joints. Caution: Inox-mx6 is premium grade clay based Extreme Pressure grease. Using it with a non-clay based grease can seriously affect its performance. Before using Inox-mx6 grease, it is advisable to remove any other non-clay based greases by flushing or pushing out the old grease with Inox-mx6 in a grease gun. Inox-mx6 EP Food Machinery Grease is available in 6 sizes:

Reference Link

Inox mx-7 is specially formulated Extreme Pressure Lithium based grease containing a high percentage of Polytetrafluoroethylene (PTFE) designed for Ultra Extreme Pressure Lubrication and where tough Thread Anti-Seize applications are required. Inox mx-7 provides high film strength, protects against start up damage in new and reconditioned machinery after long down periods before initial start-up. Inox mx-7 gives long term lubrication to parts and machinery that are difficult or impossible to lubricate after assembly while allowing for more even torque pressures and faster breakouts of joints, gaskets and threads and contains anti-corrosion additives.

Inox mx-7 is currently available in 2 sizes:

The extreme pressure and anti-wear properties of Inox-mx8 grease gives long service life under high loading and shock loading conditions from very low to very high temperature environments. These special characters of shear stability, combined with the inclusion of effective rust, oxidation and corrosion inhibitors and tackiness adhesives, ensures this grease to be the preferred recommendation for sealed for life anti-friction bearings. Inox-mx8 has the ability to prevent scuffing and reduce wear under high load and shock load conditions, together with its excellent high shear stability and high temperature operation, makes Inox-mx8 the preferred choice over other extreme pressure greases. Inox-mx8 resists ‘Squeeze Out’ from surfaces requiring lubrication under load conditions. Inox-mx8 has excellent resistance to water and water wash out even at elevated temperatures. Effective lubrication is maintained and in these situations it also gives protection against rusting and corrosion. Inox-mx8 will not thin out because it is shear resistant or thicken because it is resists oxidation. P.T.F.E. - Polytetrafluoroethylene is a premium grade anti-friction medium which gives increased lubrication and reduces operating temperatures to bearings, bushes, shafts, gears, chains, splines, PTO’s, turntables, cables, universals, CV and ball joints

Inox mx-8 is currently available in 6 sizes:

Thermal Products also keeps an ever expanding range of sealed lead acid batteries in stock, with further selections (amperage, voltage etc.) available on request. Our batteries are equipped with the latest computer-controlled battery formation technology. To achieve the highest quality and productivity in manufacturing automated systems provide programmed functions for current, time, voltage and temperature. This allows us to meet the battery performance characteristics required by our customers for every application. The system offers the following key benefits:

The following table includes the most commonly requested batteries in our range. For any other specifications please feel free to call us on +61 3 9464 0822 or email us.