Home

Automotive

Inox mx3 lubricant contains no silicon or kerosine type solvents, making it safe to use around onboard electronic systems and spray painting. It doesn’t dry out or wash off with water and has long lasting penetrating and lubricating qualities with good anti-corrosion ability. These factors combined with the mx3 lubricants non-conductive, non-corrosive and non-static nature show exactly why mx3 lubricants are a perfect fit with the automotive industry.

• Anti-corrosion penetrant and lubricant for electrical fittings and systems.
• Un-seizing light fittings, switches, solenoids & relays while keeping them moisture and corrosion free. Can also be used on brake, tail and clearance lights.
• Good anti-moisture product for coils, plugs, distributors, cable joints & connectors.
• Inox is an ideal lubricant for repairs and service work to generators, alternators, starter, wiper and window winding motors.
• In freezing and below freezing temperatures Inox can be sprayed into lock key ways, door locking and operating mechanisms to stop them freezing up.
• Spray Inox on a cloth and wipe on the door seals to stop doors freezing shut.
• Inox can be used as a penetrating oil for loosening up screws, rivets. Nuts and bolts holding body panels, spring shackles and U bolts, suspensions and steering.
• Good penetrating qualities for the easy removal of exhaust systems, head studs, manifold bolts and for the removal and replacement of sparkplugs.
• Extends shelf life when sprayed on newly ground camshafts and crankshafts, rebuilt heads, rebored and reground engine blocks.
• Spraying mx3 on a clean cloth and then polishing your dash, centre console, door panels will brings them up like new.
  

• Top|
• Applications

Aviation

• Inox anti-corrosion lubricant is highly suitable for all maintenance & service work on aircraft
• N.A.T.O. Defence Manufacturers Code No. Z5594/5

• Top|
• Applications

Commercial

• Inox lubricant is suitable for the servicing and maintenance of all office equipment. Use Inox to free any frozen parts, bolts ect and to lubricate shafts, slides, bushes, small pin and ball bearings in photocopiers, fax machines, paper shredders, typewriters, scales, cash registers, printers and adding machines.
• Spraying Inox onto a soft cloth and to clean and polish office equipment and furniture and can stop computers keyboards from sticking.
• Can be used on your concrete equipment and tools to protect trowels, floating screeds, mixer bowls, rotary finishing machine, stone and concrete cutting saw blades from corrosion between use.
• Use Inox on all electrical parts, fittings and battery terminals to stop moisture and corrosion forming.
• Inox will readily penetrate and free up frozen taps, cold & hot water valves and pipe fittings caused by rust and corrosion. Inox is a good thread cutting and tapping lubricant. Use Inox to lubricate and protect wrenches and hand tools from corrosion.
• Use Inox to lubricate wire feeds on MIG welders, anti-splatter for electric welding of stainless steel and to protect ordinary steel welds from rusting before painting. After washing with white spirits, Inox is powder coat compatible.

• Top|
• Applications

Electrical & Electronics

Inox lubricant can be used for protection against electrolysis, corrosion and condensation for all electrical & electronic circuits, parts and equipment.

• Use Inox lubricant to penetrate corrosion and free up switches, bayonet & screw socket light globes, all light fittings, plugs & cable couplings, keeping them corrosion free and in good serviceable order for up to 2 years.
• Helps prevent short circuit arcing and earth leakage.
• Use Inox to keep relay, solenoid and regulator coils & circuits, contact arms & pivots lubricated and free from corrosion. Inox is very effective in stopping condensation in this type of equipment used cold storage rooms, freezing works, abattoirs, etc, dramatically reducing instances of short circuits and seizures caused by moisture and corrosion.
• Inox can be safely spray on field windings & armatures in motors and generators to protect them from moisture and corrosion, lubricates shaft bushes and small pin & ball bearings, helps prevents grounding and seizing. For protection from moisture and corrosion caused by condensation, spray Inox into cold room fan motors and exhaust fan motors used in high moisture areas. Use Inox on power board circuits as a preventive measure against moisture and corrosion, keeps power board relays and solenoids in good operating condition, free from moisture and corrosion.
• Inox frees up sticking computer and word processing equipment key board keys, keeps them free and in a smooth operating condition. Spray Inox into multi-pin sockets and on multi-pin plugs for protection from corrosion and electrolysis caused by condensation, stops plugs sticking and jamming in. Inox keeps circuits free from moisture and corrosion, stops electrolysis. CAUTION: Do not use Inox on Recording Heads or Bladder switches (It may effect the operating efficiency of these parts).
• Inox will remove static caused by condensation and corrosion in variable condensers (allow up to 48 hours to take effect) and tuners, frees up micro-switches and make them fully functional again. Stops electrolysis and corrosion on valve contact pins and always keeps them easy to remove and replace.
  

CAUTION: Inox can be safely used on all direct, single and multi phase alternating and high tension currents with the one (1) exception; when using the Aerosol Packaged Inox, please allow a couple of minutes for the propellant gas to dissipate before switching on the current. This procedure is not required for the non-pressurized packaged Inox.
Inox can be readily removed with most mineral based solvents.

• Top|
• Applications

Engineering

• Inox is considered as being the best cutting and machining lubricant for aluminium and aluminium alloys
• Inox lubricant will allow metal to be cleanly hole punched and stamped without sticking or jamming
• Inox is a good lubricant for wire feeders on MIG welders, stops jamming and corrosion and allows the wire to feed smoothly
• Inox has a fine enough texture so that it can be used to lubricate and protect vernier callipers and micrometers from rust and corrosion.
• Inox is not compatible with soluble oil type cutting lubricants, reservoirs and feed lines must be flushed clean before using Inox as a cutting oil lubricant.

• Top|
• Applications

Farming & Mining

• Inox readily penetrates rust and corrosion to free up wheel nuts and track and blade bolts, exhaust manifolds and systems, splines and drive couplings and any other corrosion seized up equipment.
• Use Inox to free up, lubricate and protect chain & sprocket drives, splines and couplings, metal bushes, linkages, cables, locks & hinges, all electrical fittings, cable and equipment on all grain, fruit, vegetable, cane harvesting and picking equipment.
• Inox is very effective as an anti-corrosion lubricant for electrical parts and fittings on plant & machinery used in the salt mining and processing industry.
• Inox lubricant has a wide and well rounded application for the ongoing maintenance and smoother operation of all types of machinery plant and equipment used for the farming, mining and earth moving industry

• Top|
• Applications

Firearms

• Inox will keep all weapons in a first class operating condition and free from corrosion and moisture whether they are used everyday or kept in storage for long periods.
• It will not harm any timber or plastic stocks or grips or the blued or blackened metal coatings on guns.
• Inox will not dry out or gum up mechanisms or slides.

• Top|
• Applications

Fishing

• Inox anti-corrosion, anti-moisture lubricant is the best care and maintenance lubricant you could possibly use on all your fishing rods, reels and tackle.
• It will not wash out with water and is food grade so it is safe to use on hooks and lures.
• Does not taint bait
  

• Top|
• Applications

Hobbies

• For lubrication and long term protection from moisture and corrosion, use Inox anti--corrosion lubricant for model aircraft engines, wheels, all control linkages, (keeps model aircraft engines protected in storage), model sailing and motor boat steering gear and rigging, model racing cars, all remote control gear.
• Use Inox on model steam engines, pistons, cylinder, shafts and bearings, valves and slides. Use Inox on slot cars, remote control fuel and electric model racing cars, all the electrics, motors, control and steering linkages, wheels and gears, all moving parts. Electric train track switching gear, engine & carriage wheels, bushes, electric motors & contacts.

• Top|
• Applications

Manufacturing

• Inox is a fine textured, non-staining lubricant that can safely be used on all pin & roller bearings, bushes, shafts, gears, pivots and hinges for sewing machines, overlockers, electric scissors, spinning wheels and weaving looms in the textile industry. Stops moisture and corrosion problems.
• Inox is considered the best cutting lubricant for stopping tool chatter, furring and burring and other problems that are encountered when working aluminium.
• Inox anti-corrosion lubricant has a very wide application for all air operated and controlled equipment. Inox will keep moisture and corrosion out of solenoid valves, cylinders, actuators and lines.

• Top|
• Applications

Marine

• Inox anti-corrosion, anti-moisture lubricant is ideal for marine use, it doesn’t dry out or wash off with water, it’s non-conductive and non-staining and stops electrolysis between aluminum and stainless steel in salt water.
• Inox will readily free rusted and salt corroded boat fittings & parts, lights & switches, hinges & locks, steering cables, shackle bolts, slides, etc.
• Use Inox to lubricate cables, locks & hinges, linkages, slides, winches, starter motors, generators, alternators, sliding windows & doors, sail tracks (ideal), deck pulleys, towing balls & couplings and any other equipment or fittings that requires a good anti-corrosion lubricant.

• Top|
• Applications

Sports

• Inox anti-corrosion, anti-moisture lubricant is the best all round product for trouble free maintenance and protection of your sporting equipment, whether its your favourite fishing reel or traction engine or an ultra-light, if it has a cable, chain, bearing, bush, nut, bolt, screw, needs lubrication, or protection from moisture or corrosion, use Inox, you will not be disappointed.
• Use Inox to lubricate chain drives, control cables and linkages, keeps moisture and corrosion out of the electrical systems on go-karts, moto-cross bikes etc.

• Top|
• Applications